Welch Allyn PROPAQ CS Uživatelský manuál stáhnout pdf (Strana 3)

Propaq

CSSpecifications

Nellcor

•

Nellcor

OxiMax sensors

•

Waveform and pulse amplitude meter

•

Pulse tone pitch indicator

• 

Saturationrange: 1 to 100%

•

Probeaccuracy:70 to 100%, 28 to 42 °C,

DS-100A: ± 3

• 

Pulseratemeasurementrange: 25-249 bpm

• 

Pulserateaccuracy: ± 3 bpm

Option Display

•

Screendisplay: CO

waveform and EtCO

and

INCO

(when in alarm) numerics

• 

Waveformscale: (maximum) 0 to 100 mmHg,

0 to 14%, 0 to 14 kPa

•

Numericrangedisplay:EtCO

: 0 to 99 mmHg,

0 to 13.2 kPa, 0 to 23.1%; INCO

: 8

to 25 mmHg,

1.1

to 5 kPa, 1.1

to 5%

•

Units: mmHg, kPa, %; user-selectable

•

Sweepspeed:3.13, 6.25, 12.5 mm/sec; user-

selectable

•

Responsemodes:

Fast:15 sec sampling time period;

Normal:30 sec sampling time period;

Slow: 45 sec sampling time period

• 

Gascompensation: Off: CO

value = calculated

value; O

> 50%, NoN

O: CO

value =

calculated CO

value x 1.03; N

O>50%: CO

value = calculated CO

value x 0.952

• 

Alarmlimitranges:EtCO

:0 to 99 mmHg,

0 to 13.2 kPa, 0 to 13.2%; INCO

: 2 to 25 mmHg,

0.2 to 5 kPa, % (no lower limit)

• 

Resolution: 1 mmHg

•

Accuracy:

Mainstream

:0 to 30 mmHg, ± 3 mmHg

31 to 99 mmHg, ± 10% of value

Sidestream

: 0 to 30 mmHg, ± 3 mmHg

31 to 99 mmHg, ± 10% of value

• 

AltitudeError:± 0.4%/304.8 m

Breath Rate Display

•

Screendisplay: Numeric

•

Breathrate(BR)source:When CO

is active,

is the BR source. Otherwise, RESP from

ECG is the RR source

• 

Units: Breaths/Minute

•

Range:

Adult/Paed: 0 (apnea), 2 to 150 breaths/min

Neonate: 0 (apnea), 3 to 150 breaths/min

•

Resolution: ± 1 breath/min

• 

Accuracy: ± 1 breath/min or ± 5%, whichever

is greater

•

Alarmlimitsrange:

Adult/Paed: 2 to 150 breaths/min

Neonate:3 to 150 breaths/min

Performance

•

Per ISO 9918:1993(E)/EN 864:1996

Apnea Alarms and Tickets

• 

Apneaticket: Set to auto print after apnea event

and after 1 minute continued apnea

•

Apneaalarmaccuracy: ± 2 sec

•

Apneadelaysetting:

Adult/Paed: 6, 10, 15, 20, 25, 30 seconds

Neonate: 6, 10, 15, 20 seconds

Barometric Pressure

•

Pressurecompensation: automatic

•

Operatingrange: -610 to 4,572 m

(817 to 429 mmHg)

•

Screendisplay: Numeric (CO

Status Window)

•

Units: mmHg or kPa or %

•

Accuracy: ± 3 mmHg or 2.5% of difference from

calibration pressure, whichever is greater

Sidestream CO

Option (SSCO

)

• 

Sensortype: Sidestream, internal

• 

Principleofoperation:Nondispersive, infrared,

single-beam, single-path/wavelength, ratiometric

•

Operatingambienttemperature: 5 to 40 °C

• 

Startuptime: 30 seconds typical, 3 minutes

maximum

•

Risetime: 240 ms (10% to 90%) at 175 ml/min

•

Delaytime:1.12 seconds maximum

•

Totalsystemresponsetime: 1.36 seconds

(Rise Time and Delay Time)

•

Calibration: Verify semiannually, calibrate only as

required

•

Samplingchamber:Internal (replaceable by

service technician)

•

Pneumaticandexhaustsystem:Integral

•

Barometricpressurecompensation:Automatic

•

BTPS,ATPS,STPD: CO

value = calculated CO

value x 0.977

•

Samplingline: 2.13 m sampling line, ID 1.4 mm,

for use with disposable single-use cannula (CO

only or CO

sampling/O

delivery)

• 

Flowrate: 90 or 175 ml/min, user-selectable

Lower if in alarm

Based on these airway conditions: sensor temperature 42 °C, airway

adapter temperature = 33 °C, water vapor pressure =

38 mmHg; standard gas mixture = CO

in balance air, fully hydrated at

33 °C; barometric pressure = 760 mmHg and flow = 60 ml/min

Based on the following additional airway conditions: sample line =

2.13 m, 1.4 mm ID; sample flow rate =175 ml/min; respiratory rate

< 50 breaths/min, stable to ± 3 breaths/min; inspired/expired time

ratio = 1:2; barometric pressure = 760 mmHg

For Sidestream CO

, this applies only for BR

Based on the following additional airway conditions:

sample line = 2.13 m, 1.4 mm ID;

sample flow rate = 175 ml/min

Mainstream CO

Option (MSCO

)

•

waveform, EtCO

, INCO

(INCO

when

in alarm), Apnea and Breath Rate display

•

Waveform rise time: < 120 msec (to 90% after

step change)

Mainstream CO

Sensor

•

Mainstream NDIR single-beam, single path/

wavelength, ratiometric

•

Warm-uptime(CO

sensorandmonitor):

45 sec typical, 3 minutes maximum

•

Automatic zeroing

•

No routine calibration

•

Operatingaltitude: -610 to 4,572 m

(817 to 429 mmHg)

•

Dimensions:2.5 cm H x 2.6 cm W x 2.0 cm L

•

Weight: 12 g

•

Cablelength: 3.05 m nominal

Airway Adapters

•

Disposable or multi-use

•

Size: 15 mm ID (meet ISO specifications)

•

Singleormulti-useadult/paediatricairway

adapterforpatientswhoweigh

5kg:

Added deadspace: < 6 cc

•

Single-uselow-deadspaceairwayadapterfor

patientswhoweigh<5kg:

Added deadspace: < 0.6 cc

Wireless Option

•

FlexNet 802.11a wireless radio deployed on

dedicated 802.11a or enterprise 802.11a/b/g

networks

•

Industry standard IEEE 802.11a/b/g compliant

•

Frequency:2.4–2.5, 5.15–5.25, 5.25–5.35,

5.47–5.725, 5.725–5.85 GHz RF

•

WirelessmonitorsperAccessPoint:

20 (maximum)

Nurse Call Option

•

Maximumswitchcurrent: 1A

•

Maximumswitchvoltage: 30 V AC/DC

•

Isolation:1500 Vrms

•

Alarmrelay: Energised during apnea alarm or

patient alarm

•

Customisedcable: One end is a 4-pin plug,

compatible with the monitor’s nurse call connector;

the other end must be customised to connect to the

local nurse call system

Printer Option

•

Thermal sensitive dot

•

Numericannotation: date, time, all active

parameters, patient name if connected to Acuity

•

Numberofwaveformsprintedsimultaneously:

up to 3

•

Printspeeds: 6.25, 12.5, 25.0 mm/sec

•

Format: 53 mm wide print area on 60 mm wide paper

Operating modes:

Continuous: start/stop real-time printouts with all

active numerics and up to 3 waveforms

Snapshot: 8 sec (32 sec for CO

/Resp) of

immediate history for all active numerics and up to

3 waveforms

Alarmprint: 20 seconds total/12 seconds prior to

alarming parameter

Autoprint:Snapshot printout every 15 or 30 min,

or 1, 2 or 4 hours

Trendprint: On demand or Auto Trend every

4 hours. Up to 8 hours in tabular format.

OxyCRGtrendprint: Print-only function (CO

or Resp

must be installed): 2 min printout of trended HR/

PR and SpO

numerics and compressed CO

or Resp

waveforms (CO

is priority source), with annotation and

MIN/MAX tabular report

OxyCRGonalarm:Set to print out 60 sec after

HR/PR or SpO

alarm or 75 sec after BR/RR or

apnea alarm

Apneaticket:Auto print HR/PR, SpO

and elapsed

time after apnea event and after 1 minute of

continued apnea

Cuffticket:Auto print NIBP, HR/PR, SpO

, CO

and

RR/BR after each NIBP reading

1 2 3 4

Komentáře k této Příručce

Žádné komentáře

Welch Allyn PROPAQ CS Uživatelský manuál Strana 3

Komentáře k této Příručce

Související produkty a manuály pro Měření, testování a kontrola Welch Allyn PROPAQ CS